Description

PMR-30 .22 Winchester Magnum Rimfire- 4.3″ Barrel, Fiber Optic Sights, Picatinny Rail, 30 Round Magazine

The Kel-Tec PMR-30 is a light weight, full size pistol chambered for the flat-shooting .22Magnum cartridge (.22WMR). The PMR-30 operates on a unique hybrid blowback/locked-breech system. This operation system allows for the use of a wide variety of ammunition as it seamlessly adjusts between locked breach and blowback operation, depending on the pressure of the cartridge. It uses a double stack magazine of a new design that holds 30 rounds and fits completely in the grip of the pistol.

The trigger is a crisp single action with an over-travel stop. The manual safety is a thumb activated ambidextrous safety lever (up for SAFE, down for FIRE). The slide locks back after the last shot and a manual slide lock lever is also provided. The light, crisp trigger pull and fiber optic sights make the PMR-30 ideal for target shooting and hunting small game.

STRONG, LIGHT WEIGHT CONSTRUCTION

The Kel-Tec PMR-30 weighs only 13.5 oz. empty. It’s slide and barrel are 4140 steel and frame is precistion machined from 7075 aluminum. The PMR-30 grip, slide cover, trigger, mag release, and safety levers are glass reinforced nylon (Zytel), much like other Kel-Tec Pistols. Dual opposing extractors improve reliability, heel magazine release aids with magazine retention, dovetailed aluminum front sight allows easy windage adjustment. The PMR-30 disassembles for cleaning by removal of a single pin.

LOW RECOIL, RAPID FOLLOWUP SHOTS

PMR-30 uses a unique hybrid blowback/locked-breech system that seamlessly adjusts to fit the pressure of the cartridge. Recoil buffer and dual captive co-axial recoil springs combined with the crisp, short-reset trigger allow high rate of aimed fire. The barrel is fluted for light weight and effective heate disssipation. A picatinny rail is provided for mounting lights and lasers.

COMES WITH TWO 30-ROUND MAGAZINES

The Kel-Tec PMR-30 and two Zytel magazines with 60 rounds total of powerful 22WMR (70% more kinetic energy than 22LR) weigh only 25.5 oz, far less than a ruger Mk III (34 oz) or a Browning Buckmark (36 oz) with one 10-round magazine of 22LR each.
Category : Pistols
Type : Pistol
Action : Single
Caliber : 22 Winchester Magnum
Barrel Length : 4.3″
Capacity : 30+1
Safety : Ambidextrous
Grips : Black Polymer
Sights : Fiber Optic
Weight : 13.6 oz
Frame Finish : Black

4

Very happy

Posted by stephen ortiz on Sep 9th 2019

I think it’s a beautiful gun. I bought an extra clip. Well worth the money. Loaded it up but 90 rounds through it. Reloaded all three clips put another 90 rounds through it. Not a single problem

5

A great gun.

Posted by David on Jul 24th 2019

Accurate and pretty too…

5

5 star +

Posted by R Thomas on Jun 7th 2018

I would give this a 10 if they had it. So fun and accurate too

5

Finally got My own PMR30 thanks Florida Guns

Posted by JoJo on Sep 24th 2015

This weapon is ahead of its time, as far as design, function, and magazine capacity. If you know weapons and like them like I do. The

Kel-Tec PMR 30 is virtually weightless compared to any other weapon you own. Remember you are shooting a 22MAG. It packs a punch and you get to shoot 30 rounds, and it shoots flawless. All I can say is it’s my new conceal carry weapon of choice regardless of size.

5

love my pmr-30

Posted by jjay on Nov 9th 2012

I read a lot of reviews concerning this gun and decided that the folks who actually had one and used the proper ammo absolutely loved it. I liked the concept of a small caliber handgun with a large capacity clip, and decided to get one.

My local gun shop had a new design model in stock. They had heard of the moratorium on production concerning the keyholing issue and assured me that the one I was buying was of the "post-correction" vintage.

In short–we absolutely love this gun. before the first trip to the range we gave it a quick coat of dry-lube on all the metal parts and in the magazines. It shot flawlessly first time and has not had a performance issue that I know of.

My 15 year old daughter has had a gun in her hands about 6 times, this gun being most of those. At 10 yards she can put 8 of 10 rounds in a grapefruit size target in less than 15 seconds, shooting one handed.

To all the folks having mechanical issues with this gun, my experience is that many (most) exotic hard metals, most especially the stuff this thing is made of, are prone to galling without a lot of care being taken. keep a can of good spray lube handy, (and use it), when breaking this gun in, and dont be afraid to add a couple of drops of good old 3-in-1 oil when shooting heavy at the range.

We will be getting the daughter her own PMR-30 for Christmas this year.

4

Use some oil

Posted by Gun Luckey on Jun 13th 2012

I have read where the Kal-tec PMR-30 jams. When I bought mine, I couldn’t get out 2 shots. I had read that a guy shot some 200 rounds and no longer had a problem. I thought of reasons why this could be, so I sprayed some oil into the Magizine and it shot a full 30 rounds with no jams. I have since shot many magazines through this gun and it has performed without fault

5

Load on sunday, fire all week.

Posted by Jimmie Styer on Jun 2nd 2012

I bought mine on April 5 of 2011 and it took tell March 3 of this year to get it but it was worth the wait. The week after I took it out to the range. The magazine miss feed only once and I know it was my fault the way I loaded it. Besides that it never miss feed again or jammed on me. I put 550 rounds of CCI Maxi-Mag 40 grain bullet. Every round was a flame thrower. Very light gun and easy to take apart to clean.

3

PMR-30 in Vt.

Posted by The Woodchuck on Apr 26th 2012

I had a lot of trouble with mine out of the box. I was forgiving it the breakin period on loading clips. After clips had been loaded and exercised 3 or 4 times they settled in to be reasonable.

But the first time I took it out to range for a serious workout I had some kind of trigger misshap/ breakdown, after having quite a few ftf and fte. I ended up almost losing that transparent plastic buffer out in the field dropping it on the ground. When I packaged it up to send it back to Kel-Tec I mentioned what I thought of that "invisible plastic buffer" Told them it worked better than camaflage would have.

I had it returned about a week after I shipped it out with a note about the repair and had been test fired by 3 gunsmiths, also with EXTRA buffers that are now a solid white. Much better than the transparent, I WILL be careful if I disaaemble it in the winter up here in VT. It seems to be a fine performer now with about 250 rounds through it. Very accurate, light, I love it except for the initial experience.

3

Different Looking

Posted by GWNhunter on Mar 22nd 2012

Design is a bit strange. What’s up with all the rivets and Allen screws? Couldn’t the frame be a one-piece molded unit? This looks like a Frankenstein gun. Hopefully kel-tec will clean this up with future evolutions.

Next

This purchase comes with the Florida Guns Lifetime Warranty  (Read More)

Estimated shipping times are posted on the product information page under the title “Ships On Or Before:” please note that all lead-times are estimates. For items in our warehouse, we usually ship within 3 business days. For items only available at distribution or other sources, the ship time may be up to 10 business days. For items only available at the manufacturer, the lead-time may be a few weeks or longer– depending on availability.
Please also note that some items are unique, hard to obtain, or one-of-a-kind, so Impact reserves the right to cancel your order should an item not be available to ship.
We will not charge your credit card until your product ships, except for certain special orders.
We normally will ship FedEx and US POSTAL. If you need faster shipment, we can ship 2nd Day or Next Day for an extra charge.
Alaska and Hawaii residents – your order MUST ship 2nd day or faster. Most orders over $100 value will ship with a signature-required to ensure they make it to you. Products that have free shipping only applies to the lower 48 states.
NOTE: We make every effort to get your order shipped as fast as possible. In some circumstances, especially during sales and after weekends, we may not get your order shipped in the time specified. Please rest assured that we will ship your item as soon as we can.

We want you to be satisfied with your purchase and offer the following simple return policies for your benefit.
Non-Returnable Items:
Due to safety, legal, and regulatory reasons, our return policy does not apply to the following items:

firearms (including any serialized items ex. lower receivers)
black-powder guns
optics
ammunition
gunpowder
primers

Also, if a firearm is not picked up from the destination dealer, the customer is responsible for the return shipping charges and a 6% restocking fee.
Firearms Lifetime Guarantee: Florida Guns offers a lifetime guarantee of firearms. We guarantee to replace or repair any defective firearm for the life of the original purchaser. For details, see our Lifetime Warranty Policy.
How do I start the return process?

Log in to your www.florida-firearms.com account and locate and click on the “Request Return” link.
An Florida Guns agent will review your request for a return and respond within two business days.
As an alternate method, you can send an email to [email protected]. Please be sure to include your original order number and relevant contact information.

When will I get my credit or return?

Most returns are fully refunded in 3-5 days after we receive and process the return. It may take longer for the credit to appear in your account depending on your bank. Most items that are in stock ship within 3-5 days after receipt of your returned item, but may take longer depending on availability.

What about damaged/incorrect items (not including non-returnable items listed above)?

If you received a damaged, defective, or incorrect item, Florida Guns will ship you a replacement of the exact item upon receipt of the damaged or defective item. Florida Guns will send you a return shipping label for the return.

What about return shipping costs?

If an Florida Guns error causes the need to return an item or we are replacing a returned defective or incorrect item, then we will pay the associated shipping costs.
Otherwise, the customer is responsible for any return shipping costs. When returning an item, please add package tracking and adequate insurance.